ResinForce Slip-Resist 16oz Fine 40 Mesh Anti-Slip Additive

(No reviews yet) Write a Review

Slip-Resist is a micronized polymer specially designed for added grip, slight loss of gloss and fine texturing in film forming coatings.  It provides excellent slip resistance, good chemical and abrasion resistance, and can be added to most film forming coatings. 

APPLICATION: Stir entire 16 oz. container well into 1-3 gallons of solvent or water based concrete coating.  In order to maintain consistency during application, mix periodically.  Broadcasting material may also be acceptable.  Refer to the coatings SDS, technical data sheet and instructions prior to use.

PLEASE NOTE: It is always recommended to test the product in a small, inconspicuous area (on the same concrete substrate) for desire results prior to application.  Usage and coverage rates may vary for all coatings and substrates depending on porosity, density, texture, etc.